Pipeline Joint Fittings Welding Heat Shrinkable Sleeve

• Customization: Available
• Standard: DIN
• Material: Plastic
• Model NO.: TSD80
• Connection: Fire Melt
• Surface Treatment: Hot Melt
• Head Type: Round
• Size: DN700
• Color: Black
• Thickness: 2.8mm
• Width: 450mm
• Shrinkage: 40%
• Transport Package: Standard Export Package
• Specification: ISO9001
• Trademark: TSD
• Origin: China
• HS Code: 3921909090
• Production Capacity: 100million T/Year
• Package Size: 50.00cm * 20.00cm * 20.00cm
• Package Gross Weight: 5.000kg

Product Description

Pipeline Joint Fittings Welding Heat Shrinkable Sleeve



Heat shrinkable sleeve is composited by cross-linked polyethylene and
hot-melt adhesive. They are mainly used with treatment of tee joint,angle
heads, and valve connections and diameter-changing position. It is very
convenient to be installed. Used for girth welding joint. Offshore and
underground coatings are good!

Owing to special adhesive, this product has high adhesive strength,
can provide long-term protection to pipeline. It is also very convenient
to be installed


Usage:1. Oil & Gas Pipe Line2. Insulation Pipeline3. Sewr&drainage
Pipeline

The TSD-60 system provides superior corrosion protection and excellent bonding on pipelines operating up to 60°C. TSD-60 has been designed with a flexible radiation cross-linked polyethylene backing with a unique hot melt adhesive. TSD-60 is stretchable, hand-wrapped, heat-shrinkable sleeves specifically designed for the protection of the insulation without any primer used in insulated joint system. Also, it can be used for large diameter water pipes.

Compatibility
• Pre-insulated pipeline
• Mental pipes
• Plastic water pipes

Flexible Installation
• TSD-60 can be used as either a 2-layer or 3-layer sleeve system with primer or without primer.
• For added flexibility, the sleeve can be supplied as bulk rolls or pre-cut to the required pipe size

Long Term Corrosion Protection
• Provides a protective coating with the structural integrity of a seamless tube, providing excellent resistance to cathodic disbondment and excellent durability against abrasion and chemical attack.

Product thickness
Backing as supplied: 1.2mm;
Adhesive as supplied: 0.8mm.
(Designing and compounding special specification products according to the customers' requirements. sleeve thick can be 2.0mm, 2.3mm, 2.5mm, 2.8mm and 3.0mm, 3.2mm)

Storage
Store indoor, clean and dry, away from direct sunlight in a cool place below +50°C. Unlimited shelf life.
 

Technical Datas

 

Sleeve Operating Characteristics	Test Method		Test Result
Pipeline Operating Temp.			Up to 65°C
Minimum Installation Temp.			75°C (140°F)
Mainline Coating Compatibility			PE,PP, FBE,HPPC
Adhesive Properties
Softening Point	ASTM E28		100°C
Lap Shear @ 23°C	DIN 30672		79 N/cm2
Backing Properties
Tensile Strength	ASTM D638		21MPa
Elongation	ASTM D638		500%
Hardness	ASTM D2240		50 Shore D
Volume Resistivity	ASTM D257		1017 ohm-cm
Sleeve Properties
Peel Strength @ 23°C	DIN30672		96 N/cm
Impact Resistance	ASTM G14		56Inch.LBS
Indentation Resistance	ISO 21809-3		0.65mm
Cathodic Disbondment @ 23ºC, 28 days with epoxy	ASTM G8		9 mm rad
Low Temp. Flexibility	ASTM D2671-C		-32°C

 

Dimension(Standard)	Dimension(simple)
DN200*300	DN200*150
DN300*300	DN200*180
DN400*300	DN300*150
DN500*450	DN300*180
DN600*450	DN300*200
DN700*450	DN400*180
DN800*450	DN400*200
DN900*600	DN400*225
DN1000*600	DN500*300
DN1200*600	DN600*300
DN1300*600	DN700*300
DN1400*600	DN800*300
DN1500*600	DN900*450
	DN1000*450
	DN1200*450
	DN1300*450
	DN1400*450
	DN1500*450