3PE Heat Shrinkable Sleeve with Closure Patch

• Customization: Available
• Certification: RoHS, REACH, ISO
• Customized: Customized
• Model NO.: TSD
• Type: Single-Side Tape
• Feature: High Strength, Waterproof
• Color: Black
• Material: Polyethylene
• Backing: Radiation Crosslinked Polyethylene
• Adhesive: Hot Melt
• Pipe Size: 24"
• Width: 500 mm
• Thickness: 2.5 mm
• Transport Package: Standard
• Specification: 300mm, 400mm, 500mm, 600mm
• Trademark: TSD
• Origin: Qingdao
• HS Code: 39201090
• Production Capacity: 80tons/Month

Product Description

3PE Heat Shrinkable Sleeve With Closure Patch

1.10 years' expereances
2. Good anticorrosion
3. Good anti-leakage
4. Girth weld of 3PE pipelines

Product introduction

Heat Shrinkable Sleeve
Two-piece, with separate closures designed for the corrosion protection.
Heat Shrinkable Sleeve is superior performance heat shrinkable products designed for corrosion protection on field applied girth-weld joints of buried and exposed steel pipelines operating up to 80° C (176° F).

Instruction

The inner layer is two-components epoxy primer which coated on steel pipe; Intermediate level is special hot melt adhesive;
Outer layer is modified radiation crossing linking polyethylene backing

Advantages

Cross-linked backing provides superior abrasion, mechanical and chemical attack resistance.
High performance adhesive provides excellent resistance to Cathodic
Disbondment to ensure long-term corrosion protection
Just-in-time customized lengths allow bulk rolls to be field cut to protect any pipe size
Open sleeve configuration allows the product to be applied after the pipeline has been welded and cleaned.

Specifications

Pipeline size: From Ø 108 to Ø 1054mm
Sleeves width: 100mm, 150mm, 200mm, 300mm, 450mm,
500mm, 600mm, 900mm
Closure patch: 100mm, 150mm

Technical Data
 

Sleeve Operating Characteristics	Test Method		Test Result	Result
Pipeline Operating Temp.			Up to 60°C
Minimum Installation Temp.			75°C
Mainline Coating Compatibility			PE,PP, FBE,HPPC
Adhesive Properties
Softening Point	ASTM E28		95°C	pass
Lap Shear @ 23°C	ASTM D1002		400N/cm2	pass
Backing Properties
Tensile Strength	ASTM D638		2600PSI	pass
Elongation	ASTM D638		500%	pass
Hardness	ASTM D2240		50 Shore D	pass
Volume Resistivity	ASTM D257		1x1016 ohm-cm	pass
Tape Properties
Tape Thickness			2.5mm	pass
Backing thickness			1.5mm	pass
Adhesive thickness			1mm	pass
Peel Strength @ 23°C	DIN EN12068		70N/cm	pass
Impact Resistance	DIN EN12068		>15J	pass
Indentation Resistance	DIN EN12068		>1mm@60C	pass
Cathodic Disbondment @ 23ºC, 28 days with epoxy	DIN EN12068		12 mm rad	pass