Tsd Heat Shrinkable Tape for Pipes

• Standard: DIN
• Material: Plastic
• Connection: Fire Melt
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: OD610
• Surface Treatment: Hot Melt
• Head Type: Round
• Size: DN700
• Layer: 3 Layer
• Time of Delivery: 5 Days
• Application: Oil, Gas, Water, Pre-Insulated Pipeline
• Operate Temperature: 50ºC-80ºC
• Transport Package: Standard Export Package
• Specification: ISO9001
• Trademark: TSD
• Origin: China
• HS Code: 3921909090
• Production Capacity: 100million T/Year
• Package Size: 50.00cm * 20.00cm * 20.00cm
• Package Gross Weight: 5.000kg

Product Description

Crosslinked Radiation Polyethylene Heat Shrinkable Sleeve Tape

The TSD-60 system provides superior corrosion protection and excellent bonding on pipelines operating up to 60°C. TSD-60 has been designed with a flexible radiation cross-linked polyethylene white or black backing with a unique hot melt adhesive. TSD-60 is stretchable, hand-wrapped, heat-shrinkable sleeves specifically designed for the protection of the rooftop piping and duct work. Also, it can be used for large diameter water pipes.

Compatibility
• 3PE Steel Pipeline
• Metal pipes
• Plastic pipes

Flexible Installation
• TSD-60 can be used as either a 2-layer or 3-layer sleeve system with primer or without primer.
• For added flexibility, the sleeve can be supplied as bulk rolls or pre-cut to the required pipe size

Long Term Corrosion Protection
• Provides a protective coating with the structural integrity of a seamless tube, providing excellent resistance to cathodic disbondment and excellent durability against abrasion and chemical attack.

Product thickness
Backing as supplied: 1.2mm;
Adhesive as supplied: 0.8mm.
(Designing and compounding special specification products according to the customers' requirements. sleeve thick can be 1.2mm, 1.6mm, 2.0mm, 2.3mm, 2.5mm, 2.8mm)
 

TSD-3PE-60 Data Sheet

Sleeve Operating Characteristics	Test Method		Test Result
Pipeline Operating Temp.			Up to 60°C
Minimum Installation Temp.			75°C (140°F)
Mainline Coating Compatibility			PE,PP, FBE,HPPC,Metal
Adhesive Properties
Softening Point	ASTM E28		100°C
Lap Shear @ 23°C	DIN 30672		150 N/cm2
Backing Properties
Tensile Strength	ASTM D638		24MPa
Elongation	ASTM D638		600%
Hardness	ASTM D2240		55 Shore D
Volume Resistivity	ASTM D257		2x1016 ohm-cm
Sleeve Properties
Peel Strength @ 23°C	DIN30672		80N/cm
Impact Resistance	ASTM G14		56Inch.LBS
Indentation Resistance	ISO 21809-3		0.65mm
Cathodic Disbondment @ 23ºC, 28 days with epoxy	ASTM G8		9 mm rad
Low Temp. Flexibility	ASTM D2671-C		-32°C

TSD Heat Shrinkable Tape for pipes

Introduce:

Heat shrinkable sleeve is composited by cross-linked polyethylene and hot melt adhesive.
They are mainly used with treatment of tee joint,angleheads, and valve connections and
diameter-changing position. It is veryconvenient to be installed. Used for girth welding
joint Offshore and underground coatings are good! Owing to special adhesive , this product
has high adhesive strength,can provide long-term protection to pipeline. It is also very convenient to be installed

      
Features & Benefit:

1.HSWS is a wraparound sleeve with a separate closure
2.Cross-linked backing provides superior abrasion, mechanical and chemical attack resistance.
3.High performance adhesive provides excellent resistance to Cathodic Disbondment to ensure
long-term corrosion protection.
4.Just-in-time customized lengths allow bulk rolls to be field cut to protect any pipe size.
5.Easy to operate and preheating temperature low(50 ºC)
6.Open sleeve configuration allows the product to be applied after the pipeline has been welded
and cleaned.

Application:

Oil, Gas, Wate, Pre-insulated Pipeline Joint corrosion protection.



Specification:

Pipeline Diameter Size	From 50mm to 3600mm
Width	100mm, 150mm, 200mm, 300mm, 450mm, etc...
Thickness	1.8mm, 2.0mm, 2.2mm, 2.5mm, etc...
Measurement	Ton or Meter
Closure Patch	100mm, 150mm, 200mm, etc...

^{About Us:}

TSD Plastic is located in the coastal city-Qingdao, and the factory is only 1km away from Qingdao airport, 60km away from Qingdao seaport. The convenient transportation saves a lot of time and cost for our esteemed clents. 

TSD Plastic Company has its own plastic sheet production line, adhesive coating machine for heat shrinkable tapes, electro fusion welding joint line, plastic sheet and plastic welding rod All the products are produced at its own workshop from raw material to end products, so the best quality of products can be controlled. TSD products are certified to international
standards like DVGW, ISO9001, Petro China ect, anexported to more than 20 countries, which has got good
reputation because of good quality with very competitive prices!